iPhone Flashlight Not Working? 12 Best Ways to Fix it!
The flashlight has been a useful smartphone tool that most of us use in dark/low-lit environments. Whether trekking in the wild or fumbling in a dark room, we turn on our iPhone’s flashlight to find our way or spot something. That’s why Apple has made it accessible right from the lock screen. Even though this useful feature is designed to work reliably, it’s not immune to failure. We know how frustrating it is when theiPhone flashlightisn’t working and you see a greyed-out flashlight icon. But you need not worry as we’ve listed 12 tried and tested ways to get your iPhone’s torch working again. So, let’s begin!
Method 1: Make sure the Camera App is closed
Both the camera’s flash and the flashlight use the same light. You must have noticed that when you open the camera app, the flashlight icon in the Control Center is greyed out. This is because you cannot use both of them at the same time. This is one of the most common reasons why your iPhone flashlight is disabled. So, if the camera app is open, make sure to quit it to prevent any possible conflict with the flashlight.
Swipe up from the Home Screenordouble-press the home button(on iPhones with Touch ID) to bring up the recently opened apps. If you see the Camera app,swipe up on the iconto close it.
Method 2: Remove the case
Believe it or not, some iPhone cases, lens attachments, and even films tend to block the flash and prevent it from working normally. So, if the flashlight is not working on your iPhone, remove any case or attachments, and then try to use it again. If it starts working now, your case/attachment was at fault and not your iPhone.
Method 3: Turn off Low Power Mode
Low Power mode is a useful feature that helpssave battery life on an iPhone.iOS automatically puts your iPhone in Low Power mode when the battery falls below 20%. Besides, you can also choose toput your iPhone in Low Power Mode all the time. When enabled, the color of the battery level icon turns yellow, instead of white.
While Low Power mode is designed to save battery life, it also disables or limits some features on your iPhone. The list includes 5G networks, display brightness, some visual effects, automatic downloads, and more. Generally, the iPhone flashlight should work when you’ve enabled Low Power mode. However, in some rare cases, the flashlight might not work as intended when you use this feature. To avoid any complications, turn off Low Power mode and check if it fixes the iPhone flashlight stopped working problems.
Method 4: Charge your iPhone
If your iPhone flashlight suddenly stops working, you should check if your phone is charged properly. It might be possible that your phone doesn’t have enough battery to support a flashlight at the moment. As a result, your iPhone flashlight is disabled. To verify, connect your iPhone to a power source and let it charge uninterruptedly for some time. In most cases, the flashlight should start working once your iPhone has sufficient battery.
Can’t charge your iPhone? Check out thesefixes for charging-related issues on an iPhone.
Method 5: Make sure your iPhone isn’t too hot
You would probably know how extreme temperatures can affect the functionality of an iPhone, in fact, any smartphone. When your iPhone gets too hot, several things can happen. The charging will be slowed down or stopped completely, the display may turn black, or your iPhone flashlight might get disabled. Besides, you might even see a Temperature warning on the screen. This is done to mitigate any internal damage.
When your iPhone exceeds a particular temperature threshold, it will eventually shut down until it gets to a normal temperature. Move your iPhone to a cool and dry place, away from direct sunlight or other heat sources, and let it cool down on its own. Once your iPhone gets to a normal temperature, the flashlight should start working again.
Method 6: Remove and Add Flash in Control Center
If your iPhone flashlight isn’t working on the lock screen, you can access it from the Control Center. Moreover, you can also adjust the brightness of the flashlight by using its slider.
Now, tap the Flashlight icon to check if it’s working normally. Besides, touch and hold the flashlight icon to access the slider and then ensure that the brightness is set at the highest level.
Unfortunately, there can be situations when the iPhone torch won’t work in the Control Center as well. In such a case, a potential fix is to remove the flashlight feature from the Control Center and then add it back again. Here’s how you do it:
Method 7: Test Flash in Camera App
If you can’t turn on the iPhone flashlight in the Control Center, it’s time to check whether the flashlight itself is working or not. One easy way to do this is to activate the flashlight in the Camera app. Here’s what to do.
After this, try clicking a photo and see if the flash fires. If it does, then the issue is not with the hardware LED flash, rather it’s a software glitch.
Method 8: Ask Siri to Turn On Flashlight
If your iPhone’s torch and the camera flash aren’t working, there’s an alternative way to kick-start things. Unless your iPhone is low on battery, you can ask Siri to turn on the flashlight, even if the iPhone’s flashlight icon is greyed out in the Control Center. Here’s how to do it:
Method 9: Restart iPhone
Another way to fix your iPhone torch that’s not working is to try a simple restart. When you reboot your iPhone, it will wipe off any software bugs and glitches that might be responsible for why the iPhone torch isn’t working properly. Besides, it will reset some temporary settings that cause some apps and features to malfunction. Long story short, it improves the overall performance of the device and all its features. So, you must give it a try.
On iPhone without Home Button:Press and hold the Volume up/down button and the Power/Side button until the power off slider shows up. After that, drag the power off slider to shut down your device. Then, press and hold the side button until the Apple logo appears.
On iPhone with home button:Press and hold the side/top button and then drag the power off slider to turn off your device. After that, press and hold the side/top button to reboot your device.
Method 10: Update iOS
If the Apple flashlight is still not working on your iPhone, you should update iOS on your device. Apple releases its iOS updates with new features and bug fixes to improve the overall performance of an iPhone. Therefore, if a rare software bug is causing flashlight issues on your iPhone, updating iOS can resolve it.
Method 11: Backup and Restore your iPhone
This one has long been a nuclear solution for iPhones, especially when faced with a complex issue. So, if the above tricks didn’t help you fix the iPhone flashlight not working issue, try restoring your iPhone from a previous backup.
Note:When you use this method, it will completely wipe out any new data that was added to your device after you made that backup. So, you should only proceed if you’ve fully backed up your data.
If you’re a beginner, here’s a definitive guide onhow to back up any iPhone model. We’ve mentioned how to back up an iPhone using iCloud, Mac, Windows PC, and other third-party solutions. You can pick the one that best suits your requirements.
Once you have got the backup ready, check out our dedicated guide onhow to restore iPhone data from a backup.
Method 12: Reset All Settings
If none of the above steps worked for you, a specific setting is likely to interfere with your iPhone’s flashlight. In such cases, you can attempt to reset all settings on your iPhone. Doing this will wipe off any iOS glitches and bugs, and also reset all your iPhone settings to their defaults. This method is particularly useful when your iPhone flashlight isn’t working after an update. Here’s how to reset all settings on an iPhone:
Note:
This method won’t delete your saved data so there’s no need to back up your iPhone. It will only reset any saved Bluetooth connections, Wi-Fi passwords, and other settings. Make sure youdon’t hit the Erase All Content and Settingsoption from the menu. Otherwise, you’ll lose all your data.
If you’re still out of luck, you should contact Apple support. There might be some complex bug or hardware issue that can’t be fixed at your end. To avoid any further issues or damages, you should visit the nearest Apple service center to get your iPhone examined by experts.
Those were the 12 effective ways to fix flashlight issues on an iPhone. Hopefully, you found this article useful and your iPhone flashlight is back to normal. Let us know the hack that has fixed your iPhone flashlight. And if you know any other reliable solution to resolve this issue, tip us about that as well.
Some of the most common reasons why your iPhone’s flash suddenly stopped working include:1. Software bugs and glitches2. Your iPhone doesn’t have enough power3. The iPhone is too hot and some features have been disabled4. You’ve opened the Camera app5. Your iPhone is running an older or outdated iOS version6. Hardware damage
You can turn on your iPhone’s flashlight via Lock Screen and Control Center. Besides, you can always ask Siri to turn on your iPhone’s flash.
Kanika Gogia
Kanika has been a loyal iPhone user since 2014 and loves everything Apple. With a Master’s in Computer Applications, passion for technology, and over five years of experience in writing, she landed at Beebom as an Apple Ecosystem Writer. She specializes in writing How To’s, troubleshooting guides, App features, and roundups for Apple users to help them make the best use of their gadgets. When not writing, she loves to try out new recipes and enjoy some family time.
Add new comment
Name
Email ID
Δ
01
02
03
04
05
